Installing tiles in your bathroom or kitchen is not the most difficult Do-It-Yourself project. However, it does not take a lot to make errors. One best way to avoid tiling errors is to hire a professional tile installer in Broomfield CO. However, if you still want to do it as a DIY project, here are several common errors that you have to avoid.
Ensure to “Back Butter”
It is crucial to back butter whenever you’re working with bigger tiles. Back buttering will make sure that you will get a tough bond between the wall and the tile. In addition to that, you’ve got to ensure you mix well the thin-set and let it sit for around 15 minutes. This will make sure that all the dry mix has absorbed the water.
Not Installing a Backer Board
You have to install a waterproof backer board if the tile is in a place with a lot of water. This includes the bathroom. For those who do not know, the backer board will stop water from leaking into small cracks. It also helps in keeping everything firm.
Wrong Wall Prep
Before you tile the wall, you have to clean off all finger prints and grease stains from the walls. The adhesive will not adhere to the walls and neither will the tiles if the walls are not clean. There are a lot of ways that you can do to prepare the wall before installing a tile.
You should not allow the beauty of your tile to be overpowered by poor grout. To help make your tile look elegant and keep it looking new for a lot of years, it is best to utilize a clean and clear grout lines.
Tile is laid out improperly
There are particular steps that you’ve got to follow if you want to layout the tile in a diagonal pattern. First of all, you have to align the corners using a single layout line. This will center the tiles. Next, build the rest of the diagonal design around that line. To check the lines as you continue, you should utilize a straightedge.
You need to properly install the underlayment of the tile in order for them to lay flat. If it is not damaged, vinyl tile is an excellent underlayment. You can also prevent the tile from cracking if you have a solid base. You can place a ½ or ¼ inch of cement board underneath the tile to build it up if the underlayment is not in excellent shape.
Crack the Tile
Tiles could crack easily. This depends on the material they are made from. It could become extremely wasteful and costly if you break a lot of tiles. There are several steps that you can do to lower the risk of cracking a tile. The diamond wet saw is the ideal tool to utilize whenever you want to cut a tile. You should ensure that you apply an even and slow pressure when using the saw. This will help generate an accurate cut.